This was helpful 0. To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. See the documentation for the card for information about the card’s cable connections. If the module is difficult to remove, gently ease the module back and forth to remove it from the connector. FlexBay for optional floppy drive or optional Media Card Reader. Promote cracked software, or other illegal content Offensive:
|Date Added:||16 July 2011|
|File Size:||29.57 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you are installing or replacing a card, follow the procedures in the next section. If necessary, disconnect any cables connected to the card. You are reporting the following post: If you’re asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Please try again now or at a zudio time.
To continue using , please upgrade your browser.
It didn’t have any sound drivers, so I downloaded the SigmaTel drivers from Dell and installed those. Most interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one connector matches a tab or a filled-in hole on the other connector.
See the drive documentation in your upgrade kit for information on configuring devices for the cable select setting.
Ensure that you release the securing tab to unseat the card. Ground yourself by touching an unpainted metal surface on the back of the computer. Use the pull-tab to remove the data cable from your hard drive or from the system board.
Promote cracked software, or other illegal content Offensive: Snap the bracket onto the dlel drive.
Instead, set the drive on a surface, such as a foam pad, that will dikensions cushion it. See the label on the module to determine the module’s capacity.
Join in the conversation now! If dimensilns are adding a floppy drive, see ” Installing a Floppy Drive. If you are installing a processor upgrade kit from Dell, discard the original heat-sink assembly. Gently pull the securing tab, grasp the card by its top corners, and then ease it out of its connector. When removing an IDE drive data cable, grasp the colored pull-tab and pull until the connector detaches.
Dell Dimension 5150 Owner’s Manual: Sound And Speaker Problems; No Sound From Speakers
Dell Dimension E integrated sound issues. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. See the documentation that came with the drive for dijensions on installing any software required for drive operation. If the new floppy drive does not include shoulder screws, use the screws within the drive panel insert.
Removing and Installing Parts: Dell Dimension /E Service Manual
If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from the old drive by unsnapping it from the drive. To avoid damage to the drive, do not set it on a hard surface.
If the card is not removed correctly, the system board may be damaged. The brackets also keep dust and dirt out of your computer.
The pin-1 end of a connector diemnsions a board or a card is usually indicated by a silk-screened “1” printed directly on the board or card. Some network adapters automatically start the computer when they are connected to a network. Always install DDR2 memory modules in the order indicated on the system board.
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such dimensuons the metal at the back of the computer. Remove the card before connecting the floppy-drive cables. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
Do not set the heat-sink assembly upright or touch the thermal interface, as this may result in damage to the thermal interface material. The SigmaTel drivers work To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components.